Vážení zákazníci. Tento eshop momentálne slúži len pre informatívne účely, bez možnosti objednávania tovaru. Na sprístupnení ostatných funkcionalít a aktualizácii katalógu pracujeme. Ďakujeme za vašu trpezlivosť.
prevodný transformátor LTR-102
39,40 €
S DPH
Line Transformers
-
Bezpečnostné pravidlá (upraviť pomocou modulu Ubezpečenia zákazníka)
-
Pravidlá doručovania (upraviť pomocou modulu Ubezpečenia zákazníka)
-
Pravidlá vrátenia tovaru (upraviť pomocou modulu Ubezpečenia zákazníka)
Line Transformers
For an optimum signal transmission from line units to a mixer or amplifier. By using a transformer coupling, interferences due to matching problems, e.g. hum loops, are prevented to a large extent. Input and output are galvanically isolated.
All inputs and outputs can be used via 6.3 mm jacks and XLR jacks, balanced as well as unbalanced.
Line transformer
Balanced and unbalanced inputs and outputs
Output impedance can be switched from 1:1/600 ohm to 2:1/150 ohm
Phase can be switched from 0° to 180°
Ground lift switch
Wideband balancing transformer
Robust metal housing
Production Partner 03/2013
"Attractively-priced line transformer. The LTR-102 is of neat workmanship and provides respectable measured values."
Type line transformer
Frequency range 20-25000 Hz
Control range -
Control frequencies -
Input signal 5 V
Input sensitivity -
Input impedance 600 ohm
Output signal -
Output impedance 600 ohm/150 ohm
Gain -
Phantom power -
Compression -
Gate ratio -
Crossover frequency -
High-pass filter -
Low cut -
Transmission ratio 1:1/2:1
S/N ratio -
Channel separation -
THD -
Admiss. ambient temp. 0-40 °C
Power supply -
Dimensions 120 x 44 x 90 mm
Weight 600 g
Inputs 1 x 6.3 mm jack, bal. 1 x XLR, bal.
Outputs 1 x 6.3 mm jack, bal. 1 x XLR, bal.
Other features Optimum load imped.: ? 2 kOhm Optimum source imped.: 50-600 ohm
For an optimum signal transmission from line units to a mixer or amplifier. By using a transformer coupling, interferences due to matching problems, e.g. hum loops, are prevented to a large extent. Input and output are galvanically isolated.
All inputs and outputs can be used via 6.3 mm jacks and XLR jacks, balanced as well as unbalanced.
Line transformer
Balanced and unbalanced inputs and outputs
Output impedance can be switched from 1:1/600 ohm to 2:1/150 ohm
Phase can be switched from 0° to 180°
Ground lift switch
Wideband balancing transformer
Robust metal housing
Production Partner 03/2013
"Attractively-priced line transformer. The LTR-102 is of neat workmanship and provides respectable measured values."
Type line transformer
Frequency range 20-25000 Hz
Control range -
Control frequencies -
Input signal 5 V
Input sensitivity -
Input impedance 600 ohm
Output signal -
Output impedance 600 ohm/150 ohm
Gain -
Phantom power -
Compression -
Gate ratio -
Crossover frequency -
High-pass filter -
Low cut -
Transmission ratio 1:1/2:1
S/N ratio -
Channel separation -
THD -
Admiss. ambient temp. 0-40 °C
Power supply -
Dimensions 120 x 44 x 90 mm
Weight 600 g
Inputs 1 x 6.3 mm jack, bal. 1 x XLR, bal.
Outputs 1 x 6.3 mm jack, bal. 1 x XLR, bal.
Other features Optimum load imped.: ? 2 kOhm Optimum source imped.: 50-600 ohm
Line Transformers